This section describes regions supported by the Indy Modules. For information on how to configure an Indy Module for a specific region, see the configuration example Regulatory Region.
The reader will operate in a random sequence over the frequencies specified in the channel table. The channel table is not configurable in this region.
The dwell time per channel is less than 200ms. The reader may dwell up to a maximum of 400ms while performing Tag Access operations. The following table lists the available channels for this region.
Channel | Frequency (MHz) |
---|---|
1 | 902.75 |
2 | 903.25 |
3 | 903.75 |
4 | 904.25 |
5 | 904.75 |
6 | 905.25 |
7 | 905.75 |
8 | 906.25 |
9 | 906.75 |
10 | 907.25 |
11 | 907.75 |
12 | 908.25 |
13 | 908.75 |
14 | 909.25 |
15 | 909.75 |
16 | 910.25 |
17 | 910.75 |
18 | 911.25 |
19 | 911.75 |
20 | 912.25 |
21 | 912.75 |
22 | 913.25 |
23 | 913.75 |
24 | 914.25 |
25 | 914.75 |
26 | 915.25 |
27 | 915.75 |
28 | 916.25 |
29 | 916.75 |
30 | 917.25 |
31 | 917.75 |
32 | 918.25 |
33 | 918.75 |
34 | 919.25 |
35 | 919.75 |
36 | 920.25 |
37 | 920.75 |
38 | 921.25 |
39 | 921.75 |
40 | 922.25 |
41 | 922.75 |
42 | 923.25 |
43 | 923.75 |
44 | 924.25 |
45 | 924.75 |
46 | 925.25 |
47 | 925.75 |
48 | 926.25 |
49 | 926.75 |
50 | 927.25 |
The Impinj RFID Reader will use all supported channels by default.
Supported List of Countries: Argentina, Canada, Chile, Colombia, Costa Rica, Dominican Republic, Mexico, Panama, United States, Venezuela
The reader will operate in a random sequence over the frequencies specified in the channel table. The channel table is not configurable in this region.
The dwell time per channel is less than 200ms. The reader may dwell up to a maximum of 400ms while performing Tag Access operations. The following table lists the available channels for this region.
Channel | Frequency (MHz) |
---|---|
1 | 920.25 |
2 | 920.75 |
3 | 921.25 |
4 | 921.75 |
5 | 922.25 |
6 | 922.75 |
7 | 923.25 |
8 | 923.75 |
9 | 924.25 |
10 | 924.75 |
The Impinj RFID Reader will use all supported channels by default.
Supported List of Countries: Hong Kong (920-925)
The reader will operate in a random sequence over the frequencies specified in the channel table. The channel table is not configurable in this region.
The dwell time per channel is less than 200ms. The reader may dwell up to a maximum of 400ms while performing Tag Access operations. The following table lists the available channels for this region.
Channel | Frequency (MHz) |
---|---|
1 | 922.25 |
2 | 922.75 |
3 | 923.25 |
4 | 923.75 |
5 | 924.25 |
6 | 924.75 |
7 | 925.25 |
8 | 925.75 |
9 | 926.25 |
10 | 926.75 |
11 | 927.25 |
12 | 927.75 |
The Impinj RFID Reader will use all supported channels by default.
Supported List of Countries: Taiwan (922-928)
The reader will operate in a sequential sequence over the frequencies specified in the channel table. The channel table is configurable in this region.
If only 1 channel is specified in the channel table, the reader switches off for 100ms after a dwell time of 4000ms on the channel.
The reader turns off or switches channels if no tags are seen on a channel for 1000ms.
The dwell time per channel is less than 3800ms. The reader may dwell up to a maximum of 4000ms while performing Tag Access operations. The following table lists the available channels for this region.
Channel | Frequency (MHz) |
---|---|
4 | 865.7 |
7 | 866.3 |
10 | 866.9 |
13 | 867.5 |
The Impinj RFID Reader will use all supported channels by default.
Supported List of Countries: Armenia, Austria, Azerbaijan, Belgium, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Macedonia, Malta, Moldova, Netherlands, Norway, Oman, Poland, Portugal, Romania, Saudi Arabia, Serbia, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Turkey, United Arab Emirates, United Kingdom
The reader will operate in a random sequence over the frequencies specified in the channel table. The channel table is not configurable in this region.
The dwell time per channel is less than 200ms. The reader may dwell up to a maximum of 400ms while performing Tag Access operations. The following table lists the available channels for this region.
Channel | Frequency (MHz) |
---|---|
1 | 917.3 |
2 | 917.9 |
3 | 918.5 |
4 | 919.1 |
5 | 919.7 |
6 | 920.3 |
The Impinj RFID Reader will use all supported channels by default.
Supported List of Countries: Korea (917-921)
The reader will operate in a random sequence over the frequencies specified in the channel table. The channel table is not configurable in this region.
The dwell time per channel is less than 200ms. The reader may dwell up to a maximum of 400ms while performing Tag Access operations. The following table lists the available channels for this region.
Channel | Frequency (MHz) |
---|---|
1 | 919.25 |
2 | 919.75 |
3 | 920.25 |
4 | 920.75 |
5 | 921.25 |
6 | 921.75 |
7 | 922.25 |
8 | 922.75 |
The Impinj RFID Reader will use all supported channels by default.
Supported List of Countries: Malaysia (919-923)
The reader will operate in a sequential sequence over the frequencies specified in the channel table. The channel table is configurable in this region.
The dwell time per channel is less than 1800ms. The reader may dwell up to a maximum of 2000ms while performing Tag Access operations. The following table lists the available channels for this region.
Channel | Frequency (MHz) |
---|---|
3 | 920.625 |
4 | 920.875 |
5 | 921.125 |
6 | 921.375 |
7 | 921.625 |
8 | 921.875 |
9 | 922.125 |
10 | 922.375 |
11 | 922.625 |
12 | 922.875 |
13 | 923.125 |
14 | 923.375 |
15 | 923.625 |
16 | 923.875 |
17 | 924.125 |
18 | 924.375 |
The Impinj RFID Reader will use the following default channel list for this region.
Channel | Frequency (MHz) |
---|---|
3 | 920.625 |
7 | 921.625 |
11 | 922.625 |
15 | 923.625 |
Supported List of Countries: China (920-925)
The reader will operate in a random sequence over the frequencies specified in the channel table. The channel table is not configurable in this region.
The dwell time per channel is less than 200ms. The reader may dwell up to a maximum of 400ms while performing Tag Access operations. The following table lists the available channels for this region.
Channel | Frequency (MHz) |
---|---|
1 | 915.6 |
2 | 915.8 |
3 | 916.0 |
4 | 916.2 |
5 | 916.4 |
6 | 916.6 |
7 | 916.8 |
8 | 917.0 |
9 | 917.2 |
10 | 917.4 |
11 | 917.6 |
12 | 917.8 |
13 | 918.0 |
14 | 918.2 |
15 | 918.4 |
16 | 918.6 |
17 | 918.8 |
The Impinj RFID Reader will use all supported channels by default.
Supported List of Countries: South Africa (915-919)
The reader will operate in a random sequence over the frequencies specified in the channel table. The channel table is not configurable in this region.
The dwell time per channel is less than 200ms. The reader may dwell up to a maximum of 400ms while performing Tag Access operations. The following table lists the available channels for this region.
Channel | Frequency (MHz) |
---|---|
1 | 902.75 |
2 | 903.25 |
3 | 903.75 |
4 | 904.25 |
5 | 904.75 |
6 | 905.25 |
7 | 905.75 |
8 | 906.25 |
9 | 906.75 |
10 | 907.25 |
26 | 915.25 |
27 | 915.75 |
28 | 916.25 |
29 | 916.75 |
30 | 917.25 |
31 | 917.75 |
32 | 918.25 |
33 | 918.75 |
34 | 919.25 |
35 | 919.75 |
36 | 920.25 |
37 | 920.75 |
38 | 921.25 |
39 | 921.75 |
40 | 922.25 |
41 | 922.75 |
42 | 923.25 |
43 | 923.75 |
44 | 924.25 |
45 | 924.75 |
46 | 925.25 |
47 | 925.75 |
48 | 926.25 |
49 | 926.75 |
50 | 927.25 |
The Impinj RFID Reader will use all supported channels by default.
Supported List of Countries: Brazil (902-907), Brazil (915-928)
The reader will operate in a random sequence over the frequencies specified in the channel table. The channel table is not configurable in this region.
The dwell time per channel is less than 200ms. The reader may dwell up to a maximum of 400ms while performing Tag Access operations. The following table lists the available channels for this region.
Channel | Frequency (MHz) |
---|---|
1 | 920.25 |
2 | 920.75 |
3 | 921.25 |
4 | 921.75 |
5 | 922.25 |
6 | 922.75 |
7 | 923.25 |
8 | 923.75 |
9 | 924.25 |
10 | 924.75 |
The Impinj RFID Reader will use all supported channels by default.
Supported List of Countries: Thailand
The reader will operate in a random sequence over the frequencies specified in the channel table. The channel table is not configurable in this region.
The dwell time per channel is less than 200ms. The reader may dwell up to a maximum of 400ms while performing Tag Access operations. The following table lists the available channels for this region.
Channel | Frequency (MHz) |
---|---|
1 | 920.25 |
2 | 920.75 |
3 | 921.25 |
4 | 921.75 |
5 | 922.25 |
6 | 922.75 |
7 | 923.25 |
8 | 923.75 |
9 | 924.25 |
10 | 924.75 |
The Impinj RFID Reader will use all supported channels by default.
Supported List of Countries: Singapore (920-925)
The reader will operate in a random sequence over the frequencies specified in the channel table. The channel table is not configurable in this region.
The dwell time per channel is less than 200ms. The reader may dwell up to a maximum of 400ms while performing Tag Access operations. The following table lists the available channels for this region.
Channel | Frequency (MHz) |
---|---|
1 | 920.25 |
2 | 920.75 |
3 | 921.25 |
4 | 921.75 |
5 | 922.25 |
6 | 922.75 |
7 | 923.25 |
8 | 923.75 |
9 | 924.25 |
10 | 924.75 |
11 | 925.25 |
12 | 925.75 |
The Impinj RFID Reader will use all supported channels by default.
Supported List of Countries: Australia (920-926)
The reader will operate in a sequential sequence over the frequencies specified in the channel table. The channel table is configurable in this region.
If only 1 channel is specified in the channel table, the reader switches off for 100ms after a dwell time of 4000ms on the channel.
The dwell time per channel is less than 3800ms. The reader may dwell up to a maximum of 4000ms while performing Tag Access operations. The following table lists the available channels for this region.
Channel | Frequency (MHz) |
---|---|
1 | 865.1 |
4 | 865.7 |
7 | 866.3 |
10 | 866.9 |
The Impinj RFID Reader will use all supported channels by default.
Supported List of Countries: India
The reader will operate in a random sequence over the frequencies specified in the channel table. The channel table is not configurable in this region.
The dwell time per channel is less than 200ms. The reader may dwell up to a maximum of 400ms while performing Tag Access operations. The following table lists the available channels for this region.
Channel | Frequency (MHz) |
---|---|
1 | 916.25 |
2 | 916.75 |
3 | 917.25 |
4 | 917.75 |
5 | 918.25 |
6 | 918.75 |
7 | 919.25 |
8 | 919.75 |
9 | 920.25 |
10 | 920.75 |
11 | 921.25 |
12 | 921.75 |
13 | 922.25 |
14 | 922.75 |
15 | 923.25 |
16 | 923.75 |
17 | 924.25 |
18 | 924.75 |
19 | 925.25 |
20 | 925.75 |
21 | 926.25 |
22 | 926.75 |
23 | 927.25 |
The Impinj RFID Reader will use all supported channels by default.
Supported List of Countries: Uruguay
The reader will operate in a random sequence over the frequencies specified in the channel table. The channel table is not configurable in this region.
The dwell time per channel is less than 200ms. The reader may dwell up to a maximum of 400ms while performing Tag Access operations. The following table lists the available channels for this region.
Channel | Frequency (MHz) |
---|---|
1 | 920.25 |
2 | 920.75 |
3 | 921.25 |
4 | 921.75 |
5 | 922.25 |
6 | 922.75 |
7 | 923.25 |
8 | 923.75 |
9 | 924.25 |
10 | 924.75 |
The Impinj RFID Reader will use all supported channels by default.
Supported List of Countries: Vietnam (920-925)
The reader will operate in a sequential sequence over the frequencies specified in the channel table. The channel table is configurable in this region.
The dwell time per channel is less than 0ms. The reader may dwell up to a maximum of 0ms while performing Tag Access operations. The following table lists the available channels for this region.
Channel | Frequency (MHz) |
---|---|
1 | 916.25 |
The Impinj RFID Reader will use all supported channels by default.
Supported List of Countries: Israel
The reader will operate in a sequential sequence over the frequencies specified in the channel table. The channel table is configurable in this region.
The dwell time per channel is less than 3800ms. The reader may dwell up to a maximum of 4000ms while performing Tag Access operations. The following table lists the available channels for this region.
Channel | Frequency (MHz) |
---|---|
1 | 918.25 |
2 | 918.75 |
3 | 919.25 |
4 | 919.75 |
The Impinj RFID Reader will use all supported channels by default.
Supported List of Countries: Philippines
The reader will operate in a random sequence over the frequencies specified in the channel table. The channel table is not configurable in this region.
The dwell time per channel is less than 200ms. The reader may dwell up to a maximum of 400ms while performing Tag Access operations. The following table lists the available channels for this region.
Channel | Frequency (MHz) |
---|---|
1 | 923.25 |
2 | 923.75 |
3 | 924.25 |
4 | 924.75 |
The Impinj RFID Reader will use all supported channels by default.
Supported List of Countries: Indonesia
The reader will operate in a random sequence over the frequencies specified in the channel table. The channel table is not configurable in this region.
The dwell time per channel is less than 200ms. The reader may dwell up to a maximum of 400ms while performing Tag Access operations. The following table lists the available channels for this region.
Channel | Frequency (MHz) |
---|---|
1 | 922.25 |
2 | 922.75 |
3 | 923.25 |
4 | 923.75 |
5 | 924.25 |
6 | 924.75 |
7 | 925.25 |
8 | 925.75 |
9 | 926.25 |
10 | 926.75 |
11 | 927.25 |
The Impinj RFID Reader will use all supported channels by default.
Supported List of Countries: New Zealand (921-928)
The reader will operate in a sequential sequence over the frequencies specified in the channel table. The channel table is configurable in this region.
If only 1 channel is specified in the channel table, the reader switches off for 50ms after a dwell time of 4000ms on the channel.
The dwell time per channel is less than 3800ms. The reader may dwell up to a maximum of 4000ms while performing Tag Access operations. The following table lists the available channels for this region.
Channel | Frequency (MHz) |
---|---|
6 | 916.8 |
12 | 918.0 |
18 | 919.2 |
24 | 920.4 |
The Impinj RFID Reader will use all supported channels by default.
Supported List of Countries: Japan (916-921)
The reader will operate in a random sequence over the frequencies specified in the channel table. The channel table is not configurable in this region.
The dwell time per channel is less than 200ms. The reader may dwell up to a maximum of 400ms while performing Tag Access operations. The following table lists the available channels for this region.
Channel | Frequency (MHz) |
---|---|
1 | 916.25 |
2 | 916.75 |
3 | 917.25 |
4 | 917.75 |
5 | 918.25 |
6 | 918.75 |
7 | 919.25 |
8 | 919.75 |
9 | 920.25 |
10 | 920.75 |
11 | 921.25 |
12 | 921.75 |
13 | 922.25 |
14 | 922.75 |
15 | 923.25 |
16 | 923.75 |
17 | 924.25 |
18 | 924.75 |
19 | 925.25 |
20 | 925.75 |
21 | 926.25 |
22 | 926.75 |
23 | 927.25 |
The Impinj RFID Reader will use all supported channels by default.
Supported List of Countries: Peru
The reader will operate in a sequential sequence over the frequencies specified in the channel table. The channel table is configurable in this region.
If only 1 channel is specified in the channel table, the reader switches off for 100ms after a dwell time of 4000ms on the channel.
The dwell time per channel is less than 3800ms. The reader may dwell up to a maximum of 4000ms while performing Tag Access operations. The following table lists the available channels for this region.
Channel | Frequency (MHz) |
---|---|
1 | 916.2 |
2 | 917.4 |
3 | 918.6 |
4 | 919.8 |
The Impinj RFID Reader will use all supported channels by default.
Supported List of Countries: Russian Federation (916-921)
See the Configure the Indy Module with a Custom Region feature for a detailed usage description.